background image

Page 3

W

Waarrrraannttyy

1 Soundcraft is a trading division of Harman International Industries Ltd .

End User means the person who first puts the equipment into regular operation.
Dealer means the person other than Soundcraft (if any) from whom the End User purchased
the Equipment, provided such a person is authorised for this purpose by Soundcraft or its
accredited Distributor.
Equipment means the equipment supplied with this manual.

2 If within the period of twelve months from the date of delivery of the Equipment to the End

User it shall prove defective by reason only of faulty materials and/or workmanship to such an
extent that the effectiveness and/or usability thereof is materially affected the Equipment or the
defective component should be returned to the Dealer or to Soundcraft and subject to the
following conditions the Dealer or Soundcraft will repair or replace the defective components.
Any components replaced will become the property of Soundcraft.

3 Any Equipment or component returned will be at the risk of the End User whilst in transit (both

to and from the Dealer or Soundcraft) and postage must be prepaid.

4 This warranty shall only be valid if:

a)

the Equipment has been properly installed in accordance with instructions contained in

Soundcraft’s manual; and 
b)

the End User has notified Soundcraft or the Dealer within 14 days of the defect appearing;

and
c)

no persons other than authorised representatives of Soundcraft or the Dealer have

effected any replacement of parts maintenance adjustments or repairs to the Equipment; and
d)

the End User has used the Equipment only for such purposes as Soundcraft recommends,

with only such operating supplies as meet Soundcraft’s specifications and otherwise in all
respects in accordance Soundcraft’s recommendations.

5 Defects arising as a result of the following are not covered by this Warranty: faulty or negligent

handling, chemical or electro-chemical or electrical influences, accidental damage, Acts of God,

neglect, deficiency in electrical power, air-conditioning or humidity control.

6 The benefit of this Warranty may not be assigned by the End User.

7 End Users who are consumers should note their rights under this Warranty are in addition to

and do not affect any other rights to which they may be entitled against the seller of the

Equipment.

Summary of Contents for SPIRIT LIVE 4 2













































Reviews: