SoundCraft SPIRIT LIVE 4 2, User Manual

Page: 25 / 44

Page 25
3377 AAUUXXIILLIIAARRYY M MAASSTTEERRSS
Each of the Auxiliary Send busses is provided with a rotary MASTER LEVEL fader and
an AFL switch with indicating LED which monitors the final output after the fader.
AUX 4 normally receives post-fade sends from the input channels, but may be
switched to pre-fade by pressing the AUX 4 PRE switch.
3388 PPFFLL//AAFFLL OONN
This LED illuminates to show that a PFL or AFL is active on the headphones, and to
show that the Left & Right meters will be displaying the PFL/AFL signal.
3399 PPHHOONNEESS
This control sets the level of the PHONES output jack.
4400 M MOONNOO CCHHEECCKK
Normally the Phones output monitors the Stereo Mix. Pressing the MONO CHECK
switch sums the L & R outputs to check for phasing problems. The main outputs are not
affected by the position of the switch.
4411 M MUUTTEE M MAASSTTEERRSS
Four MUTE MASTER switches provide muting control of any channels which have
been assigned to a mute group using the M1-M4 switches on the input channels. The
associated LED illuminates when the MUTE is active.
4422 PPHHOONNEESS JJAACCKK
The PHONES output appears on a 3-pole 1/4” jack, suitable for headphones with an
impedance of 200 W or higher.