manualshive.com logo in svg

SoundCraft Si Performer, User Manual

Share
Download
SoundCraft Si Performer User Manual Download Page 48

48

Soundcraft Si Performer User Guide  0912

INPUTS & VCA MENU

The INPUTS & VCA menu provides information and access to all parameters and functions 
concerning system inputs and VCA group masters..

NOTE: The INPUTS & VCA button is greyed-out and not accessible unless a fader assigned 
as an input or VCA is SELected.

 

Input (or VCA) Name

:  The name of the currently SELected input; press the SCROLL/ADJUST 

encoder to access the QWERTY keyboard to edit the name.  

Isolate

:  

Isolates the input from automation playback and lights the ISOlate 
indicator on the ACS when status is set as ‘Enabled’.

NOTE: When isolated the channel settings are still stored when a cue is stored or updated.
NOTE: Mic amp gain and 48v are not included in the ISOlate since these are not con-
sidered parameters of the channel as conflict could arise with 2 channels sharing the 
same mic amp should one channel be isolated and the other not.
Type

:  

Sets the channel as either Mono or Linked

NOTE: Channels are always linked as an odd/even pair

Pan Mode: 

LCR or LR (not available for stereo channels) When set to LCR pan 
operates as LCR pan. When both the LR and MONO routing keys are 
active, pan operates as standard LR pan if only the LR routing key is 
active or if the Pan Mode is set as LR.

LCR Pan Width: 

Adjust the pan law when in LCR mode is active to increase/decrease 
the contributions to the LR and Mono buses when panning.

Direct Out Pre/Post

:  Allows the pick-up point of the direct out to be set as either pre or 

post high pass filter.

NOTE: Direct Out Pre/Post has no function and is not available unless a Direct Out 
patch is made. 

Summary of Contents for Si Performer

















































































Reviews:

No comments

Brands by name

Popular brands

Load more brands