manualshive.com logo in svg

SoundCraft Si Performer, User Manual

Share
Download
SoundCraft Si Performer User Manual Download Page 21

21

Soundcraft Si Performer User Guide  0912

LEXICON

TM

 INTERFACE

1.  FX key: press to open the Lexicon menu pages.

2.  Lexicon encoders (x4): used to adjust the parameters within an effect. The encoders are 

context dependent upon what is shown on the touch screen at any given time.

3.  TAP keys (x4): used to set the tempo of any of the patch using delays/measures; the 

keys flash with the set tempo.  

4.  SCROLL/ADJUST encoder: used to navigate between processors, pressing the encoder 

allows a different patch to be selected from the 29 available patches:

Reverb Patches: 14 types
Delays: 7 types
Effects: 8 types including Chorus, Flanger, Phaser and Rotary

5.  PAGE TABS: used to navigate through parameters available in the selected patch; tabs 2 

and 3 are greyed out as appropriate if there are no parameters on those tabs.

NOTE: Pressing the FX key while COPY/PASTE is active will enter the FX copy/paste 
mode; see COPY/PASTE for more details.

2

1

3

4

5

Summary of Contents for Si Performer

















































































Reviews:

No comments

Brands by name

Popular brands

Load more brands