background image

5

Soundcraft Si Expression Quick Start Guide  1112

Ventilation should not be impeded by covering the ventilation openings with items such 
as newspapers, table cloths, curtains etc.

THIS APPARATUS MUST BE EARTHED

.  Under no circumstances should the safety earth 

be disconnected from the mains lead.

The mains supply disconnect device is the mains plug. It must remain accessible so as 
to be readily operable when the apparatus is in use.

If any part of the mains cord set is damaged, the complete cord set should be replaced.  
The following information is for reference only.
The wires in the mains lead are coloured in accordance with the following code:

Earth (Ground):  Green and Yellow (US - Green/Yellow)
Neutral:   

Blue (US - White)

Live (Hot): 

Brown (US - Black)

As the colours of the wires in the mains lead may not correspond with the coloured 
markings identifying the terminals in your plug, proceed as follows:

The wire which is coloured Green and Yellow must be connected to the terminal in 
the plug which is marked with the letter E or by the earth symbol. 
The wire which is coloured Blue must be connected to the terminal in the plug 
which is marked with the letter N.
The wire which is coloured Brown must be connected to the terminal in the plug 
which is marked with the letter L.
Ensure that these colour codes are followed carefully in the event of the plug being 
changed.

This unit is capable of operating over a range of mains voltages as marked on the rear panel. 

NOTE: 

This equipment has been tested and found to comply with the limits for a Class A 

digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide 
reasonable protection against harmful interference when the equipment is operated in a 
commercial environment. This equipment generates, uses and can radiate radio frequency 
energy and, if not installed and used in accordance with the instruction manual, may cause 
harmful interference to radio communications. Operation of this equipment in a residential 
area is likely to cause harmful interference in which case the user will be required to correct 
the interference at his own expense.

This Class A digital apparatus meets the requirements of the Canadian Interference-Causing 
Equipment Regulations.
Cet appareil numérique de la Classe A respecte toutes les exigences du Règlement sur 
le matériel brouilleur du Canada.

Summary of Contents for Si EXPRESSION





















Reviews: