14
Soundcraft MADI-USB Card User Guide 0914
RECORDING AND USING A STAGEBOX SIMULTANEOUSLY
The MADI-USB Combo Card is designed to combine the two steps above, simultaneous
recording and remote I/O. Once a Stagebox patch is made and inputs are being received
by the console remotely, the direct output patches from these incoming inputs can be
sent to a DAW for recording.
The setup would look as follows:
Providing the Dipswitches are set as above and the Stagebox is connected, clocked and
receiving audio, channels will be sent from the Stagebox through the console and straight
out to the DAW for recording. Due to the freely assignable architecture of Si Consoles,
Direct out patches and input patches can be made from anywhere, to anywhere on the
console for maximum flexibility.
A suggested setup is as follows:
Stagebox and Recording
Stagebox Input
Console Channel
Direct Output Patch
Stagebox Input 1
1
MADI-USB Combo Card 1
Stagebox Input 2
2
MADI-USB Combo Card 2
Stagebox Input 3
3
MADI-USB Combo Card 3
Stagebox Input 4
4
MADI-USB Combo Card 4
Etc.
Etc.
Etc.
Local I/O
Stage I/O
Both Local and Stagebox sent via USB
