SoundCraft GB2R, User Manual

Page: 5 / 36

5 GB2R User Guide
NOTE: This equipment has been tested and found to comply with the limits for a Class A digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference when the equipmentis operated in a commercial environment. This equipment gener-
ates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the
instruction manual, may cause harmful interference to radio communications. Operation of this equipment
in a residential area is likely to cause harmful interference in which case the user will be required to correct
the interference at his own expense.
This Class A digital apparatus meets the requirements of the Canadian Interference-Causing Equipment
Regulations.
Cet appareil numérique de la Classe A respecte toutes les exigences du Règlement sur le matériel brouilleur
du Canada.
WARNING: To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture.
Do not expose the apparatus to dripping or splashing and do not place objects filled with liquids, such as
vases, on the apparatus.
No naked flame sources, such as lighted candles, should be placed on the apparatus.
Warning: Do not use this apparatus in very dusty atmospheres, or in atmospheres containing flammable
gases or chemicals.
THIS APPARATUS MUST BE EARTHED. Under no circumstances should the safety earth be disconnected
from the mains lead.
The mains supply disconnect device is the mains plug. It must remain accessible so as to be readily
operable when the apparatus is in use.
If any part of the mains cord set is damaged, the complete cord set should be replaced. The following
information is for reference only.
The wires in the mains lead are coloured in accordance with the following code:
Earth (Ground): Green and Yellow (US - Green/Yellow)
Neutral: Blue (US - White)
Live (Hot): Brown (US - Black)
As the colours of the wires in the mains lead may not correspond with the coloured markings identifying the
terminals in your plug, proceed as follows:
The wire which is coloured Green and Yellow must be connected to the terminal in the plug which is
marked with the letter E or by the earth symbol.
The wire which is coloured Blue must be connected to the terminal in the plug which is marked
with the letter N
The wire which is coloured Brown must be connected to the terminal in the plug which is marked
with the letter L
Ensure that these colour codes are followed carefully in the event of the plug being changed
This unit is capable of operating over a range of mains voltages as marked on the rear panel.