SAFETY WARNINGS AND GUIDELINES
2
• These speakers are intended for indoor use
only.
• Do not expose these speakers to water or
moisture of any kind.
• If operating these speakers in a humid
environment, ensure that no condensation
occurs. Condensation could cause damage to
the speaker cones and voice coils.
• Power off and unplug all Audio/Video compo-
nents when making wired connections. Only
apply power after all connections have been
made.
• Double-check all connections prior to applying
power to ensure that speaker polarity is
properly made and that there are no stray wire
strands, which could short the connections,
either on the backs of the speakers or the AV
receiver/amplifier.
• Do not use full volume until after the speakers
have been fully broken-in.
• If you hear distortion, reduce the volume until
the distortion is no longer audible. Distortion
can sound like a buzzing, scratching, or
hammering sound. Distortion can damage to or
destroy the delicate speaker coils.
• Do not use cleaning fluids, solvents, or other
chemicals to clean the speaker frames or
grilles.
• Do not use excessive volume when listening to
these speakers. If you experience pain,
discomfort, or dizziness, reduce volume
immediately. Prolonged exposure to excessive
volume can cause permanent hearing damage.
• Do not disassemble or attempt to service these
speakers.
• You must use speaker wire rated for in-wall
use.
• Do not attempt to install these speakers near
power outlets, wall switches, or ceiling fixtures.
These objects indicate the presence of AC
power lines within the wall or ceiling and
should be avoided.
• When checking for the presence of objects
behind the wall, do not try to force the wire
past obstructions.
• Always check and adhere to your local building
and fire safety codes before installing these
speakers and running wires through the walls
and ceiling.
