www.soundskulptor.com
Document revision 1.1 – Last modification : 01/05/14
EQ573 Assembly guide – Main board
10. Relays
Add RLY1 and RLY2.
11. Electrolytic capacitors
Add C19 to C23, C76, C77, C82, C83, C85, C90, C91, C93 to C96.
Solder one lead first, adjust verticality then solder the second lead.
Warning
: The +lead must go into the +hole. Do not reverse (they may explode !)
12. Inductors
It is necessary to leave a small gap between the inductors and the PCB surface in order to avoid any
electrical contact between the metal parts and pads. Fit a piece of double sided adhesive tape (supplied
with the kit) on the inductor, between the pins. It is not necessary to remove the second protective
layer from the tape as it is only used as a spacer.
Solder L1 and L2.
Copyright ©2011 to today SoundSkulptor
