www.soundskulptor.com
Document revision 2.1 – Last modification : 12/11/17
CP5176 Assembly guide – Main PCB
11. Jumper headers
Insert the 5 pins jumper header JMP1. Solder one pin first, check verticality, then solder the other pins.
12. Transistors and regulators
Add Q1 to Q4 and U3.
Warning
: Watch out the transistor direction.
13. Film capacitors
Add C1 to C4, C24, C7, C30, C5.
14. Connector
Add CN1. Solder one pin, check verticality then solder the other pins.
15. Trimmer potentiometer
Add P5, P6, P7. These 3 trimmers are different from each other. Solder one pin, check verticality then
solder the other pins.
16. Non polarized small electrolytic capacitors
Add C15, C16.
These caps are not polarized and can be inserted in any direction.
17. Polarized small electrolytic capacitors
Add C8, C11, C23, C25, C27, C28.
Add C12, C13, C14, C29.
Add C6, C9, C31, C32, C33, C34.
Warning
: The +lead must go into the +hole. Do not reverse!
18. Inductor
Add L1. This inductor is installed vertically.
Copyright ©2013 to Today SoundSkulptor