2. Power ON LED: When the unit in switched on it is lit.
3. RF LED: When lit, it means that a transmitter is active and the unit receive a ra-
dio-frequency signal. If this LED is off even though the transmitter is powered on, it
means that batteries are low, or transmitter and receiver frequency aren’t matched.
4. Volume Knob: It increases or decreases the output level of BALANCED and MIX
outputs.
5. Antenna: It receives RF signals from the transmitter.
6. Mix Output: It is the unbalanced audio line output with ¼” Jack to use in case of
connection to mixers or audio equipment with unbalanced connections.
7. Balance Output: It is the balanced XLR audio line output to connect to your mixer
or audio system. For more details about the internal wiring of balanced cables,
refer to paragraph "9. AUDIO CABLES" at page 11.
8. DC Input: Connect here the external power supply (12V – 400mA).
6. HANDHELD MICROPHONE FUNCTIONS
WF-V11H system features a handheld transmitter with profession-
al dynamic cardioid capsule. Below there’s a quick description of
main parts.
9. Grille: It protects the microphone capsule. Never remove it to
prevent damage to the internal parts of the microphone.
10. ON/MUTE/OFF Selector: This selector has 3 positions.
When it’s all to the OFF position, the microphone is turned
off; when it is MUTE position, the microphone is active but
the audio is disabled; finally, when it’s all to ON position, the
microphone is working and the audio is active.
NOTE: Standby central position allows the unit to
transmit without audio. This option is important to prevent
interference in the receiver due to the absence of a radio
transmitting signal. It is, therefore, suggested to ALWAYS use
this standby position when you temporarily don’t sing or play
but the wireless microphone is connected to an audio system
(e.g. during a pause in a show). You can move the switch to OFF position (all
down) only when you are sure that the sound system volume is low.
11. Power LED: It briefly lights up when the transmitter is on. In case of battery low,
it keeps on lighting, warning that you need to replace the batteries as soon as
possible.
OFF
MUTE
ON
BATT
9
10
11
12
8
ENGLISH
WF-V11 User manual
