the receiver.
f
Connect a balanced audio output (7)
or the unbalanced (6) to your mixer or
sound system, using the appropriate
cables (see following section 9 for fur-
ther details).
f
Turn on the receiver by pressing POW-
ER button (1); power LED (2) will light
up.
NOTE: Before switching on the Receiver, turn the volume control knob to mini-
mum, adjust the volume as needed when the Receiver is working.
9. AUDIO CABLES
You need XLR balanced cables for connections to your audio equipment. See the
pictures below that show the internal wiring of these cables. Be sure to use only high
quality cables (visit our website
for further details).
Balanced use of XLR connectors
1= Ground/Shield
2= Hot (+)
3= Cold (-)
INPUT
OUTPUT
In case of unbalanced use Pins 1 and 3 will be jumped
Balanced use of 1/4” jack TRS connector
Strain relief
clamp
Sleeve
Tip
Sleeve
Ground shield
Ring
Ring
Cold (- Ve)
Tip
Hot (+ Ve)
You can, of course, connect even unbalanced equipment to balanced outputs. Use ei-
ther mono and stereo jack, making sure ring and collar are connected together (or pins
1 & 3 in the case of XLR connectors).
Unbalanced use of 1/4” jack TS connector
Strain relief
clamp
Sleeve
Tip
Sleeve
Ground shield
Tip
Signal
Beyond 1m
from ground
Beyond 1m
from walls
POWER
RF
0
10
VOLUME
VHF PLUG & PLAY WIRELESS SYSTEM
11
ENGLISH
WF-V11 User manual
