background image

7

10

Operating the body-pack mic/transmitter.

                   

Indicator LED for Power and battery status 

Power switch:  Toggles power on or off.

4-Pin Microphone Input Jack.

Group Button: Changes group Setting 
LED Display: Displays group and channel setting.
Channel Button:  Changes channel setting.

Audio Gain Adjustment: Rotate to increase or decrease transmitter gain.

 Changing 

batteries.

Install 2 new AA alkaline batteries in the transmitter for 
best results; expected life is approximately 14 hours.

When the transmitter light 

1

 glows red, replace the 

batteries.

Adjust Gain Settings:

Rotate the audio gain adjustment to increase (+) or decrease 
(-) the gain until desired level is reached.  

 

 
For instruments, turn gain to minimum setting.  For headsets, 
increase gain as desired.

1

2

3

4

5

wireless 1

line out

spkr out

spkr out

wireless 2

Connect line out-
put to the line input 
of another Voice 
Machine to daisy-
chain them together.

The line output is an
unbalanced, line-level and 
composite signal of the 
sound system inputs.

Connect the speaker 
outputs to VM-2C 
companion speakers 
to expand coverage.

3

2

1

5

4

6

7

6

7

Summary of Contents for vm-2









Reviews: