"microphone boost" in the "microphone enhancements" box. You can now close the
Audio Commander.
This completes the standard driver installation and setup. Here are the
recommended parameters for setting up your software for recording:
Audio Input Device (or recording device): Andrea USB Audio Device
File Format: PCM (or WAVE)
Sample Rate: 44,100Hz - Note: for smaller files and only slightly lower quality audio,
you can use 22,050Hz instead
Bit rate: 16
11 - On the interface, turn all of the mute switches to the "ON" position. Plug your
microphones into the microphone inputs.
12 - If you are using Eclipse software, please see section 17.2 Audio: Multi-channel
recording of your owners manual
If you need assistance, please email [email protected] or call
us at 609-267-4400
