5
RackPack
Repairs:
Unplug the machine and immediately contact a qualified technician when you think
repairs are needed – or when moisture or foreign objects may accidentally have gotten in to
the housing, or in cases when the machine may have fallen and shows any sign of having been
damaged. This also applies to any situation in which the machine has not been subjected to
any of these unusual circumstances but still is not functioning normally or its performance is
substantially altered. In cases of damage to the power cord or its plug, first consider turning
off the main circuit breaker before unplugging the power cord.
Spare Parts:
Be sure that any service technician uses original spare parts or those with iden-
tical specifications as the originals. Incorrectly substituted parts can lead to fire, electrical
shock, or other dangers, including further equipment damage.
Safety Inspection:
Be sure always to ask a service technician to conduct a thorough safety
check and ensure that the state of the repaired machine is in all respects up to factory
standards.
Cleaning:
In cleaning, do NOT use any solvents, as these can damage the chassis finish. Use
a clean, dry cloth (if necessary, with an acid-free cleaning oil). Disconnect the machine from
your power source before cleaning.
Warnings
DO NOT PLACE THE MACHINE IN SUCH A WAY THAT IT MIGHT COME INTO CONTACT WITH
OR SIT ON ANY FLUIDS. AVOIDING SUCH CONTACT WILL AVOID HAZARDS FROM FIRE,
DANGEROUS ELECTRICAL SHOCK OR MACHINE DAMAGE. DO NOT OPEN THE MACHINE. THE
LIGHTNING SYMBOL WITHIN A TRIANGLE WARNS YOU ABOUT UNINSULATED HIGH VOLTAGE
INSIDE THE TRANSDUCER AND THE POTENTIAL FOR DANGEROUS ELECTRICAL SHOCKS –
WHICH CAN ALSO OCCUR EVEN AFTER THE MACHINE HAS BEEN DISCONNECTED FROM A
POWER SOURCE.
Symbols And Notes
ALSO IN THIS MANUAL A LIGHTNING SYMBOL WITHIN A TRIANGLE WARNS YOU ABOUT THE
POTENTIAL FOR DANGEROUS ELECTRICAL SHOCKS – WHICH CAN ALSO OCCUR EVEN AFTER
THE MACHINE HAS BEEN DISCONNECTED FROM A POWER SOURCE.
AN EXCLAMATION MARK (!) WITHIN A TRIANGLE IS INTENDED TO MAKE YOU AWARE OF
IMPORTANT OPERATIONAL ADVICE AND/OR WARNINGS THAT MUST BE FOLLOWED. BE
ESPECIALLY ATTENTIVE TO THESE AND ALWAYS FOLLOW THE ADVICE THEY GIVE.
The symbol of a lamp directs your attention to explanations of important functions or
applications.
Attention
Do not attempt any alterations to this machine without the approval or supervision of SPL
electronics GmbH. Doing so could nullify completely any and all of your warranty/guarantee
rights and claims to user support.
Important Safety Information
