background image

2

RackPack: Preference Mic Pre

Manual Preference Mic Pre

Model 2711

Version 1.0 – 8/2007

Designer: Wolfgang Neumann

This user‘s guide contains a description of the product. It in no way represents 
a  guarantee  of  particular  characteristics  or  results  of  use.  The  information  in 
this document has been carefully compiled and verified and, unless otherwise 
stated or agreed upon, correctly describes the product at the time of packaging 
with this document.

Sound Performance Lab (SPL) continuously strives to improve its products and 
reserves the right to modify the product described in this manual at any time 
without prior notice. This document is the property of SPL and may not be cop-
ied or reproduced in any manner, in part or fully, without prior authorization by 
SPL.

SPL electronics GmbH, Sohlweg 55, 41372 Niederkruechten, Germany   
Phone. +49 (0)2163 983 40 

 

Fax +49 (0)2163 983 420 

 

E-Mail: [email protected] 

 

Internet: www.soundperformancelab.com

CE Declaration of Conformity 

 

Manufacturer:  SPL  electronics  GmbH,  Type  of  Equipment:  Audio 
Signal Processor, Product: RackPack/Preference Mic Pre, Model 2711, 
Compliance Engineer: Wolfgang Neumann

Test  Basis:  EN50081-1:1992,  EN50082-1:1992,  EN60065:1993,  EN61000-3-
3:1995,  EN60065:2002,  EN55013:2001,  EN55020:2002,  EN61000-3-2:2000, 
73/23  EWG;  93/68  EWG.  We  herewith  declare,  that  the  construction  of  the 
Preference Mic Pre, Model 2711, is in compliance with the standards and regula-
tions mentioned above.

Notes on environmental protection

At the end of its operating life, this product must not be disposed of 
with regular household waste but must be returned to a collection 
point  for  the  recycling  of  electrical  and  electronic  equipment.  The 
“wheelie  bin“  symbol  on  the  product,  user‘s  manual  and  packag-
ing indicates that. The materials can be re-used in accordance with their mark-
ings. Through re-use, recycling of raw materials, or other forms of recycling of 
old products, you are making an important contribution to the protection of our 
environment. Your local administrative office can advise you of the responsible 
waste disposal point. 

WEEE Registration: 973 349 88

© 2007 SPL electronics GmbH. All rights reserved. Names of other companies 
and their products are trademarks of their respective owners.

Summary of Contents for Preference Mic Pre 2711





















Reviews: