Sound Leisure VINYL POP, User Manual

Page: 10 / 24

4.2 Loading Records
Ensure the mechanism is NOT playing a selection before loading/unloading any
records. Stand at the front of the unit then follow the instructions below while
referring to figure 4.1.
WARNING - DO NOT PLAY WARPED RECORDS AS THIS COULD DAMAGE THE
PLAYING MECHANISM.
i. Locate the Main Drive Belt as shown in fig 4.1. To load records the drive
belt should be manually rotated which will in turn rotate the record
basket. This allows discs to be loaded in to the basket via the Disc
Loading Area.
ii. Grasp the Main Drive Belt as shown on fig 4.1. Now pull it gently
downwards. This will rotate the basket anticlockwise.
WARNING – WHEN MANUALLY ROTATING THE BASKET ENUSRE THERE ARE
NO ITEMS IN THE WAY SUCH AS LOOSE CLOTHING / FINGERS / JEWELLRY/
TOOLS ETC AS THESE COULD BECOME CAUGHT AS THE BASKET ROTATES AND
CAUSE DAMAGE OR INJURY
.
iii. Continue to rotate the basket in this way until
the required record slot is positioned
approximately in the centre of the Disc Loading
Area as shown on fig 4.1.
Each slot is numbered and the triangular sticker
points towards the specified slot. In the image on
the left disc 136 should be placed to the right of
the 136 sticker as illustrated by the dashed
orange line.
iv.
Now slide the chosen record into the
required slot in the basket. If the record will not
slide cleanly in to the required slot, remove it
then rotate the basket again to ensure the slot is
in the centre of the Disc Loading Area.
When inserting the disc, Side A should face
towards the LEFT of the slot
Side B should face towards the RIGHT of the
slot.