Sound Leisure Mini Jook, Service Manual

Page: 18 / 31

- Page 14 -
6. DIL SWITCH SETTINGS
DIP SW 1 BANK 1
Mechanism setting in conjunction with display. Turn ON at mains with DIP SW1 ON.
The left digit of display indicates if the Sync Opto is blocked or clear.
The display will show '0' if Opto is clear or '1' if the Opto is blocked.
The right hand digit shows button pressed.
Button '1' energises phase '1' on stepper motor.
Button '2' energises phase '2' on stepper motor.
Button '3' energises phase '3' on stepper motor.
Button '4' energises phase '4' on stepper motor.
Button '5' & '6' open and close clamp arm.
Button '7' & '8' moves pick up arm up and down one position.
Button '9' & '0' moves transfer arm in and out.
To exit this routine turn the mains OFF, return DIP SW1 to OFF position and turn the
mains back ON.
DIP SW 2 Stepper motor speed ON = FAST, OFF = SLOW.
DIP SW 3
When DIL SW3 is on, and the service switch is in the OFF position the least played disc
will be automatically fetched from the stack by the pickup arm.
Remove the least played disc from the pickup arm and replace with the new disk.
Pressing
CANCEL on the selection keypad to return the new disc to the stack.
When this process is complete the second least played disc will be automatically
fetched from the stack and presented for exchange. This process will continue,
presenting discs within the stack in descending order of popularity until all discs have
been exchanged. This process can be exited at any time by switching the machine
'OFF' then 'ON' with service switch in the operate position.
This will automatically reset the popularity table.
DIL SW 4 Permanent random play.
DIL SW 5 Not Used.
DIL SW 6 Count skips on bad discs.
DIL SW 7 Allows programming credit table when set to ON position in service mode.
DIL SW 8 Permanently free credit.
N.B. DIL SW 3 has priority over DIL SW 7.