6.
Tape to Control Room.
Press this button to send the tape signals to
the control room and headphone. Release the button to send the main
signals to the headphone and control room.
7.
Phones/CTRL RM.
Controls the signal of the control room and the
headphones.
8.
Power On LED.
Shows the products is on when the light is illuminated
9.
Output level Meter.
Shows the signal output level being sent to the
internal amplifier. When the upper red LED’s are illuminated this
indicates that the maximum level for the amplifier has been exceeded.
10.
Main.
Master volume control. Increase or decreases the post mix signal
to the amplifier.
Diag. 4
1.
Aux Ret.
Aux return inputs via 2 x 6.35mm mono jack sockets. Use the
left channel with a mono input.
2.
Aux send.
Aux output via 6.35mm mono jack socket.
3.
Phones.
Headphone output via 6.35mm jack socket.
4.
CTRL RM.
Stereo output channel via 2 x 6.35mm mono jack sockets.
For use with powered monitors.
5.
Main.
Stereo output channel via 2 x 6.35mm mono jack sockets
6.
REC OUT.
Stereo output channel via 2 x phono sockets
7.
Tape In.
Input channel via 2 x phono sockets
8.
Phantom power switch.
Press this switch to send a 48V phantom
power to channels 1-4.
Warning
1
2
3
4
5
6
7
8
EFFECT SELECT
MAIN
5/6
7/8
POWERED MIXER
TAPE TO MIX
TAPE TO
CTRL ROOM
DSP
EFFECTS PROCESSOR
G742BB (MC8240PD)
DO NOT
OBSTRUCT THE
VENTILATION
FOR PROFESSIONAL USE
9
10
Diag. 3
AUX/RET
AUX/SEND
PHONES
EFFECT SELECT
MIC 1
MIC 2
MIC 3
MIC 4
LINE 1
LINE 2
LINE 3
LINE 4
MAIN
1
2
3
4
5/6
7/8
Model
G742BB
POWERED MIXER
TAPE TO MIX
TAPE TO
CTRL ROOM
TAPE
IN
REC
OUT
2 x 100w
DSP
EFFECTS PROCESSOR
Complies with: EN 60065 EN 55103
Fuse: T3.15A. A/S 250V 5x20mm
(Ref No. F126N)
230V~50Hz 360VA
Ta max - 35ºC
THIS UNIT MUST BE EARTHED
G742BB (MC8240PD)
DO NOT
OBSTRUCT THE
VENTILATION
2 x 100W @ 4
Right
Left
2 x 75W @ 8
FOR PROFESSIONAL USE
ONLY
Diag. 4
1
2
3
4
5
6
7
8
