use of a sound-limiting device is recommended. This can be viewed at
www.electrovision.co.uk.
9.
Do not allow liquid or foreign objects to be inserted into this product.
Should this happen by accident do not attempt to repair the product.
Repairs should only be undertaken by a competent person.
10.
Do not subject the product to heavy impacts. This can cause internal
damage that can go unnoticed by visual inspection.
11.
This mixer amplifier is heavy. Take care when lifting. Seek advice if you
are not sure how to lift an item correctly.
12.
The mixer amplifier should be placed on a safe, stable and level surface
that is vibration free. Always make sure the product is stable and
cannot fall when in use. When used on a mobile stand always check the
stand is capable of accepting the weight of the product. The stand
should be checked for defects before mounting the product. Never use
this product on a stand that is damaged or is not capable of accepting
the weight of the product.
13.
This product is not suitable for domestic use.
14.
When used in a fixed installation the product should be installed by a
qualified personal in accordance with the relevant health and safety
legislation.
Operating Precautions.
1.
Do not turn the amplifier up so that the sound becomes distorted. This
will damage the speakers and could damage the internal amplifier. This
is not covered by the guarantee.
2.
Make sure this product is switched off and all volume controls are
turned down before connection to the mains (see controls and
functions). All items
connected to the unit (CD players, electric
instruments etc.) should be switched off and volume controls turned
down before connection to the mains (see instruction books for the
appropriate product). A surge protection device is recommended for
use with this product. The amplifier should be switched on first and
then connected products.
3.
Position the product correctly and safely before switching on. See item
13 of the safety precaution guide.
4.
Only use high quality interconnecting leads. They will improve the
sound quality. These can be viewed at www.electrovision.co.uk
5.
This product should only be cleaned with a damp cloth. Do not use any
cleaning agents such as detergents or solvents.
6.
Do not use any spray cleaners or lubricants on any of the controls or
switches. Make sure the speakers are connected before switching on.
The speaker leads should be checked for damage before use. Only use
high quality speaker leads. These can be viewed at
www.electrovision.co.uk
