PIX-E7
Quick Start Guide
Accessories
There are various accessories that can further enhance your field monitoring and recording experience.
These accessories may be purchased separately or as part of the PIX-E7 KIT.
ACCESSORY
PHOTO
DESCRIPTION
PIX-LR
The PIX-LR is an audio interface accessory that provides
PIX-E recording monitors with XLR I/O, Sound Devices
-caliber mic preamps, hyper-accurate LED metering, and
dedicated transport and gain controls.
SpeedDrive
This media enclosure ships either with a 240 GB mSATA
SSD drive installed or as an enclosure only, letting you
purchase your own mSATA drive of variable sizes. A list
of approved media is available online at:
http://www.videodevices.com/support/approved-media
The SpeedDrive can also double as a USB 3.0 drive for
high-speed transfers.
PIX-ARM
The PIX-ARM, with its ¼-inch screws, mounts PIX-E
devices to cameras, tripods, etc. It also includes a hot
shoe mount for DSLRs. The center knob will lock all three
articulation points simultaneously for quick adjustments
of orientation and position.
PIX-E7 CASE
Made from durable plastic and filled with custom, cutout
foam inserts, the case is designed to take the beating so
your monitor is protected during transport.
The PIX-E7 KIT also comes packaged in the case and
includes additional accessories, such as adapters,
cables, drives, etc.
This table is not an all-inclusive list of accessories available for use with the PIX-E monitors. For the most up-to-date
product accessory information, visit the Video Devices website at:
Declaration of Conformity
Manufacturer’s Name:
Sound Devices, LLC
Manufacturer’s Address:
E7556 State Road 23 and 33
Reedsburg, WI 53959 USA
Declares under sole responsibility that the product as delivered
Product Name:
PIX-E Recording Field Monitor
Model Number:
PIX-E7 (includes auxiliary equipment: SpeedDrive, external AC adapter, and
external Lithium battery packs)
Description:
A camera-mount recording field monitor with 7-inch LCD.
Product Options:
This declaration covers all options of the above product
complies with the essential requirements of the following applicable European Directives,
and carries the CE marking accordingly:
EMC Directive (2014/30/EU)
EN 55022:2010
EN 55103-2:2009
Low Voltage Directive (2014/35/EU)
EN 60065:2014
RoHS Directive (2011/65/EU)
WEEE Directive (2012/19/EU)
This Declaration of Conformity applies to the above-listed product(s) placed on the EU market after:
December 10, 2015
Date
Matt Anderson
President
10
11
