manualshive.com logo in svg

Sound Devices MixPre-10T, User Manual

Share
Download
Sound Devices MixPre-10T User Manual Download Page 58

User Guide

58

System Settings

Page

Sub-Menu

Description

1

Mode

Lets you switch the operating mode between Basic, Advanced and 

Custom.

1

File Transfer

Lets you transfer files between the MixPre and a host computer.

1

Limiters

Lets you turn limiters on/off (available only in Advanced or Custom 

modes).

2

Bluetooth

Switches Bluetooth Smart on/off.

2

Wingman Password

Lets you set a password that would be required when connecting to 

the MixPre-10T with the Wingman app.

2

Brightness

Lets you independently adjust the brightness of the touch screen and 

the ring LEDs.

2

Version

Provides the current firmware version and serial number.

3

Regulatory

Provides full Federal Communications Commission (FCC) compliance 

information specific to MixPre-10T.

3

Date/Time

Provides access to set the date, time, and formats for both. 

3

Update Firmware

Lets you update the MixPre firmware from a file on the SD card.  The 

latest MixPre firmware can be downloaded from the Sound Devices 

website: 

www.sounddevices.com/support/downloads

3

Tune Crystal

Lets you fine tune the MixPre-10T’s internal crystal frequency to an 

external word clock or LTC signal via the BNC In port.

Summary of Contents for MixPre-10T


































































Reviews:

No comments

Brands by name

Popular brands

Load more brands