MixPre
User Guide
20
Outputs
The MixPre features multiple Output configurations for flexible record-
ing scenarios. The Outputs menu is available in Advanced mode. In
the Outputs menu, you may send any channel, Aux input, USB input
or LR mix to either the outputs, mute outputs, and control gain. The
MixPre-3 and MixPre-6 Stereo Out can be configured to send audio or
LTC timecode.
MIXPRE-3 & MIXPRE-6:
STEREO OUT MUTE
Mutes the output.
STEREO OUT GAIN
Adjusting output gains is useful for optimizing
the level feeding downstream devices such as transmitters, external
mixers, PA, etc. The level of the output can be set to Off, 40 to +20 dB
in 1 dB steps.
STEREO OUT LEFT OR RIGHT
Configures output source, select
from Mix L, Mix R, Isolated Channels (pre or post-fade), Aux In, or USB
streaming into the MixPre from a computer.
USB 1-6 (MIXPRE-3)
Configures output source from L,R, 1-3 (pre- or
post-fade), Headphone L, R, or Output L,R.
USB 1-8 (MIXPRE-6)
Configures output source from L,R, 1-6 (pre- or
post-fade), Headphone L, R, or Output L,R.
MIXPRE-10T :
L/R OUT MUTE
Mutes the output.
X1/X2 OUT MUTE
Mutes the output.
L/R GAIN
Adjusting output gains is useful for optimizing the level
feeding downstream devices such as transmitters, external mixers,
PA, etc. The level of the output can be set to Off, 40 to +20 dB in 1 dB
steps.
X1/X2 GAIN
Adjusts the level of the output from Off, 40 to +20 dB
in 1 dB steps.
LEFT OR RIGHT OUTPUT
Configures output source, select from Mix
L, Mix R, Isolated Channels (pre or post-fade), Aux In, or USB stream-
ing into the MixPre from a computer.
LEFT, RIGHT, X1, X2 OUTPUT DELAY
Output delay is particularly
useful when sending audio to video operators on a production set to
ensure that audio is in sync with their camera video feeds. Outputs
can be delayed from 0 to 400 ms.
USB 1-12
Configures output source from L,R, 1-10 (pre- or post-fade,
Headphone L, R, or Output L,R, X1,X2.
TO ROUTE THE L/R AND X1/X2 STEREO OUTPUTS:
1. Tap
.
2. Tap Outputs.
3. Select any of the following:
L Output
R Output
X1 Output
X2 Output
4. From the routing matrix, select what channel to send to the output.
In addition, if you choose to send the channels to outputs, you can
select either pre-fade (Channel knob has no effect) or post-fade
(Channel knob controls level).
