- 14 -
A10-TX User Guide
Remote Control
The A10-TX can be remotely controlled from an Android or iOS device running the A10-TX
Remote app. The app is available as a free download from the Google Play store and iOS App
store, respectively.
With the A10-TX Remote app, you can:
1 -
Change the transmitter’s name; the serial
number is used at default. When using User
Groups, the user name is displayed.
2 -
View timecode and frame rate
3 -
Monitor Sleep status, Battery status,
Bluetooth signal strength, Record status,
Mute Status
ª
Touch the Circle-I icon to send
identification signal to the transmitter.
4 -
Turn Sleep mode On/Off
5 -
Mute/Unmute the transmitter
6 -
Start/Stop recording at the transmitter
7 -
Adjust Gain
8 -
Set the low-cut filter
9 -
Adjust RF Power
10 -
Change TV Ch, Sub Ch and Frequency
ª
When a user group is loaded, the TV Ch/
Sub Ch/Frequency section changes to
User, displaying the user names between
+ / - Selection buttons as shown below:
1
3
4
10
7
8
6
9
1
2
3
Touch the name (left image) to access more information (right image) about the transmitter.
ª
The Bluetooth operational range is very short. Maintain close proximity to the transmitter
for reliable connection.
