8
To Uninstall
Sound Blaster 16
PCI
1. Click the Start menu, point to Settings and click Control Panel.
2. Double-click the Add/Remove Programs icon.
3. On the Install/Uninstall tabbed page, select Sound Blaster 16 PCI.
4. Click the Add/Remove button, and then click the Yes button when prompted to remove the
software.
To Install
Software in
Windows NT 4.0
❑
❑
❑
To Uninstall Sound Blaster 16 PCI
❑
To Reinstall the Audio Drivers From the Installation Disc
❑
A Windows NT 4.0 Service Control Manager error message appears...
To Install
Audio Drivers
1. Insert the installation CD into your CD-ROM drive.
The installation screen appears.
2. Follow the instructions on the screen to complete the installation.
To Test the
Installation
You may run a simple application to test the card’s MIDI and Wave sound playback. This
ensures that the card is properly installed and that there are no conflicts in the IRQ, DMA, or
I/O settings.
1. In the Start menu, point to Programs, point to Accessories, point to Multimedia, and then
click Media Player.
2. On the File menu, click Open.
3. Browse to any folder that contains a file with the extension .WAV. Select the file and click
the Open button. Click the Play button to play the file.
