16
When the “ ” indicator light on the control panel flashes, the HEPA filter needs to be replaced.
When the “ ” indicator light on the control panel flashes, the Carbon filter needs to be replaced.
1. Stop the operation and unplug the unit. Take off the back panel. (See P14 replacing the pre-filter)
2.
Hold the HEPA filter’s handle, pull it toward to you, then pull out the HEPA filter.
3.
Hold the carbon filter’s handle, pull it toward to you, then pull out the Activated carbon filter.
Replacing the HEPA filter and the Carbon filter
Warning
DO NOT reuse or clean the Pre-filter, HEPA filter and the carbon filter.
DO NOT clean the Pre-filter, HEPA filter and the carbon filter with liquid, especially alcohol, gasoline,
paint thinner, etc. It may cause fire!
Remove plastic packaging from the
Pre-filter, HEPA filter and the carbon
filter before operation.
After replacing the filters, hold the
flashing indicator button 3 seconds or
press the reset button on the remote
control to reset the time for the filters.
Note
Take out the HEPA filter
Take out the Activated carbon filter
H
C
Care and Maintenance 3