13
Operation 4
Remote Control Operation
8
1
3
4
5
2
7
6
1 Power (ON/OFF) Button
The unit will start operating when the POWER button is pressed.
Pressing the button again will stop operation.
2 Scheduled operation time Buttons
a. The first time press the “TIME” button, the digital clock on the display
panel is flashes, calibrate the current time by pressing the "+" or "-"
buttons.Then press the “ ” button, the minute display starts flashing.
Also calibrate the current minute by pressing the “+” or “-” buttons.
b. Press the “TIME” button a second time, the "ON" indicator light on the
display panel is light on. At this point, press the "+" or “-” buttons to set
the start time of the unit through the same time setting method.
c. Press the “TIME” button a third time, the “OFF” indicator light on the
display panel is light on. At this point, according to the same time setting
method, press the "+" or “-” buttons to set the unit’s shutdown time.
d. Press the “ ” button to confirm the above time setting. At this time,
the unit is turned on and off at the set time every day.
3 SPEED Button
The fan speed can be switched among L- M- H- Auto settings.
4 NIGHT Button
When pressed, all the indicator lights on the display panel will go out.
5 UV-C+ LAMP Button
: Turns UV-C+ lights on and off.
6 NEG.ION Button
: Turns Negative Ions on and off.
7 TIMER Button
The set time switches every time the button is pressed as shown below
：
1hr - 2hr - 4hr - Cycle - Cancel.
8 RESET Button
Pressing the reset button 3 times will reset the replacement indicator lights.