© 2016-2021 SOTA Instruments Inc.
Page 8 of 9
|
www.sota.com
The LightWorks Model LW2 Manual
ELECTRICAL SPECIFICATIONS
POWER REQUIREMENTS
12 Volts DC @ minimum 1.5 Amps,
Tip or Center Positive
.
Caution
: Exceeding the voltage rating or reverse connection may result in injury or
unit failure. This will
void
the warranty.
OPTIONAL POWER INPUT
To operate the LightWorks from a 12 Volt DC source, such as an automobile battery
or an appropriate Solar Panel, purchase a Universal Power Cord with
Tip or Center
Positive polarity
.
LIGHT OUTPUT SPECIFICATIONS
Red LEDs:
Features 60 high-intensity Red LED lights with a wavelength of 660
nanometers (nm) (+/- 10 nm) and a light output of approximately 718 milliwatts
(mW)
*
.
Near Infrared LEDs:
Features 57 high-intensity Near Infrared invisible LED lights
with a wavelength of 850 nanometers (nm) (+/- 10 nm) plus 3 visible Red LED lights,
with a light output of approximately 455 milliwatts (mW)
*
.
Frequency Tolerance:
+/- 1 Hz.
*Light output measured using a Newport Optical 1830-C Light Meter.
TROUBLESHOOTING
A Troubleshooting Guide for the LightWorks is available at
www.sota.com/manuals
. This Guide is a great tool to check if you are experiencing
any issues with your unit.
COUNTRIES THAT PARTICIPATE IN MANUFACTURING
The manufacturing of the SOTA Products is a global collaboration. The following
countries participate in the making of the LightWorks (listed in alphabetical order):
Canada, China, Hong Kong, Malaysia, South Korea and Taiwan
.
REPLACEMENT ACCESSORIES
To replace your accessories, contact your supplier.