Sota LightWorks LW2 Manual Download Page 4

© 2016-2021 SOTA Instruments Inc. 

Page 4 of 9

|

 www.sota.com

The LightWorks Model LW2 Manual

decision to use the technology and that you hold SOTA harmless for any injuries  or 

damage believed to arise from using the SOTA Products.

SUMMARY OF LIGHTS

GREEN: Indicates which mode is selected.
ORANGE: Indicates that the Automatic Option is in operation.

HOW TO USE THE LIGHTWORKS

1. Insert the power plug from the AC-DC Wall 

Adaptor into the unit and plug the adaptor into an 

electrical outlet.

2. Remove the protective cover from the lens on both 

sides of the Hand Paddle.

3. Plug the FLAT END of the LightWorks Cord into 

either of the USB ports on the base of the unit. The 

USB symbol should be face down as in  

Image 1. 

Plug the SQUARE END of the LightWorks Cord 

into the Hand Paddle as in

 Image 2. 

When positioned correctly, the cord will slide in gently. Do not force.

4.  Push the ON/OFF/MODE button. All the lights on the 

base will flash in sequence to indicate the unit is ready for 

use. The unit starts in the Automatic (AUTO) Option and 

begins with the Constant Mode. The AUTO light will flash 

continuously.
5.  Select one side of the Hand Paddle by pushing the 

Hand Paddle button. Only one side of the Hand Paddle is 

operational at a time. Push the Hand Paddle button to check 

the operation of each side of the Hand Paddle.
Option: The LightWorks can be used with two Hand Paddles 

at the same time.  See ‘Using Two Light Accessories’ on  

page 6.

1

2

Summary of Contents for LightWorks LW2










Reviews: