© 2006 SOTA Instruments Inc.
© 2006 SOTA Instruments Inc.
4
5
As with all electrical products do not use:
a. Near water
b. When driving a car or
c. When operating heavy equipment
OPERATIONAL CAUTIONS
GETTING STARTED
1. Place the 9-Volt Alkaline battery in the unit.
a. On the back of the unit, slide off the battery cover.
b. Position the 9-Volt Alkaline battery so the the positive (+) and negative (-)
terminals line up as in the diagram.
Note
: the smaller circle on
the battery matches the
smaller circle in the case.
… the larger battery circle
matches the larger circle in
the case.
c. Slide the 9-Volt Alkaline
battery into the case and
push down. Slide the cover
back onto the unit.
2. Turn the unit ON by rotating the
thumbwheel switch clockwise.
3. All the lights will flash once to
indicate the unit is ready for use. If
the lights do not come on, the
battery may not be placed correctly.
4. When the unit is turned on it always
starts in Mode 1.
5. The green light for Mode 1 will remain
on indicating the timing sequence
has begun.
6. Turn the unit OFF by rotating the
thumbwheel switch until it clicks.
Important: Do not force the ON-OFF
Thumbwheel Switch past its natural
stopping point.
