19 / GB
MAINTENANCE AND CLEANING
This mixer does not normally require maintenance, but occasionally the
ventilation holes in the motor housing (25) should be cleaned.
Cleaning:
Keep the safety devices, ventilation slots and motor housing as free of
dirt and dust as possible. Clean the unit by rubbing it with a clean cloth
or blow it clean using low-pressure compressed air.
After approx. 100 hours of operation, check the motor brushes and
replace if necessary. Clean the motor housing.
After approx. 200 hours of operation, renew the grease filing in the
gearbox.
To verify that the protective insulation remains intact, the mixer must
be subjected to a technical safety test afterwards. This work must be
performed only by a professional electrician.
STORAGE
The mixer should be stored in a dry and frost-proof place.
ENVIRONMENTAL PROTECTION
• Do not open worn-out mixers.
• Do not dispose mixer or mixer parts in general household waste.
Always return them to the collection facilities provided for recycling or
destruction.
• Please take care of the environment.
