15 / GB
To ensure protection from electric shocks, injury and fire:
• Always use the correct supply voltage. The power supply voltage
must match the information quoted on the tool identification plate.
• Always inspect cable and plug before using the mixer. Any damage
must be repaired by a qualified professional.
• Always check that the mixer is switched off before putting the plug in
the main socket.
• Never use the cord for carrying, pulling or unplugging the machine.
• Keep cord away from heat, water, oil, sharp edges or moving parts.
• Always lay the cable away from the mixer towards the rear.
• The mixer must not be damp and must not be operated in a wet
environment.
• Avoid body contact with earthed or grounded surfaces, such as
pipes, radiators, ranges and refrigerators.
• Only use an approved extension cable that is suitable for the
machine’s power. The cord must have a diameter of at least 1.5
mm².
• Mixers used outdoor must be connected via an earth fault circuit
breaker. Use only extension cables that are intended for outdoor use
and splash water protected.
• The mixer may create sparks. Therefore do not operate the mixer in
an explosive atmosphere, such as in the presence of flammable
liquids, gases or dust.
