GB / 18
19 / GB
SAFETY
When using an extension cable, please observe the following,
• Never use a longer cable than necessary.
• Always use a cable with a minimum dimension of 1 mm
2
.
• Never use the cable when it is rolled up. Always roll it out completely.
When mixing materials that emit unpleasant or dangerous vapours
and/or dust, a dust liminator is recommended.
TECHNICAL DATA
Model 200L/30
Motor:
400V – 2.2 kW – 50 Hz
W/L/H:
60*60*85 cm
Mixing capacity: 200 litres
Weight:
175 kg (empty).
LAeq<75dB(A) with mortar.
Model 300L/30
Motor:
400V – 3.0 kW – 50 Hz
W/L/H:
60*75*106 cm
Mixing capacity: 270 litres
Weight:
281 kg (empty).
LAeq<75dB(A with mortar.
CONTACT DETAILS
Production Unit / Technical Support
Egegårdsvej 4-6
DK-2610 Rødovre
Tel. +45 36 72 78 00
NOTE
The safety grid should be in front of the output gate at all times. If the
machine is jammed, e.g. by larger stones, ensure that the plug is discon-
nected from the protective motor switch, before removing the obstruc-
tion. Do not put your fingers or any object up through the mixer gate.
CLEANING / MAINTENANCE
Before cleaning the mixer, the plug must be removed from the socket.
Open the lid and lift the mixer arms off the axle. The mixer arms are
easily removed without using tools. Firstly wash the mixer arms and the
entire mixer drum using water.
NOTE
While the mixer arms are disconnected from the axle tower, make sure
that neither water nor dust etc. enter the axle tower.
When cleaning has ended, place the mixer arms onto the axle and
close the lid.
TRANSPORT
When transporting the SoRoTo 200 L Forced Action Mixer it is recom-
mended that the mixer be placed on the four wheels, the lid closed and
locked - using the rubber strap.
When transporting the SoRoTo 300 L Forced Action Mixer with the trac-
tion bar, the traction bar is locked with 2 pin bolts. The traction bar can
now be attached to a vehicle. The 300 L mixer may only be transported
locally and at very low speed. During transport, the lid must be closed
and locked using the rubber strap. When transporting the SoRoTo 300
L on a truck, the mixer may be lifted onto the truck with the help of e.g.
a pallet truck. Please observe that the wheels must be blocked during
transport.
Administration / Order Processing
Ved Damhussøen 24
DK-2720 Vanløse
Tel. +45 36 72 75 00
