27/04/04 ©
Söring
Users manual RF-units
1
not valid for MBC600
-29-
Bipolar
Cut
1
Step 1
Bipolar
Coag
Step
1
Only after the self-test the instruments should be adapted. If the monopolar handpiece is
connected and the patient electrode is not connected, the red patient electrode indicator blinks in
the safety field. Settings in the function field are possible. However activation of the equipment is
not possible (see chapter 5.1). If in spite of this an attempt is made, a warning signal sounds.
5.2.4. Adjustment of function fields
After switching on the equipment, the function fields are in the state described in 5.2.3. By simple
activation of keys or the adjustment control in the function fields, the desired output
characteristics can be chosen (see. Chap. 5.1)
