Instructions for use Loop
SORG
41 of 44
2019-08-16
5 Technical data
5.1 Data and
measurements
Model: Loop
SORG
Type: 802
Measurements ± 5%
Designation
Dimensions
Remarks
Size 1
usable width =
frame + 40 mm
WW 300-420 mm
in 40 mm increments
suitable from ST 320 mm, per WW + 40 mm
growable
Size 2
usable width =
frame + 40 mm
WW 340-460 mm
in 40 mm increments
suitable from ST 380 mm, per WW + 40 mm
growable
Size 3
usable width =
frame + 40 mm
WW 380-500 mm
in 40 mm increments
suitable from ST 440 mm, per WW + 40 mm
growable
Back height
430 or 580 mm
optional
Back unit
can be shifted backwards by approx. 60 mm
Leg support
can be shifted forward by approx. 60 mm
Tilting
from -5 ° to +35 °
optional
from +2.5 ° to +40 °
Back angle:
90 - 120 °
Lower leg length:
120 - 550 mm
ETRTO wheel size
at 20"
Ø 451 mm
with drum brakes (TRB), conventional pneu-
matic tyres in sizes 1" (25.4 mm), 1 3/8"
(35 mm) - sizes 355 mm (20"), 451 mm (22"),
540 mm, (24"). All puncture-proof tyres in
the specified dimensions. As well as 12"/ 16"
in the size ETRTO 47-203
ETRTO wheel size
at 22"
Ø 489 mm
ETRTO wheel size
at 24"
Ø 540 mm
ETRTO wheel size
at 12"
Ø 203 mm
Handrim diameter
at 20"
444 mm
at 22"
481 mm
at 24"
533 mm
Handrims
Ø 19 mm
Tube diameter
Camber
0° or 2°
4° only limited
Seat height (SH)
with horizontal seat and hor-
izontal frame
A-wheel 20"/22"
Caster 5"/5.5"
410 mm size 1
430 mm size 3
Height adjustment
+20/+40/+60 mm
A-wheel 20"/22"
Caster 6"/7"
420 mm at size 1
440 mm at size 3
Height adjustment
+20/+40/+60 mm
A-wheel 24"
Caster 5"/6"
430 mm at size 1
450 mm at size 3
Height adjustment
+20/+40/+60 mm
A-wheel 24"
Caster 7"
445 mm size 1
465 mm size 3
Height adjustment
+20/+40 mm
Width seat shell-underframe
absolute
min.
WW + 220 mm
dependent on camber and wheel type
max.
WW + 300 mm
Length seat shell-underframe
absolute
min.
610 mm at frame size 1, 12" wheels and normal footrest (160 mm)
max.
1130 mm at frame size 3, 24" wheels, wheel base extension and wide
footrest (230 mm)
Height seat shell-underframe
absolute
min.
900 - 1000 mm
at WH 430 mm and 45° push bail
max.
1050 - 1150 mm
min.
1000 - 1100 mm
at WH 580 mm and 45° push bail
1150 - 1250 mm
Height seat shell-underframe
back folded in
min.
550 mm
max.
620 mm
Permissible incline
12% = 7°
at 0° tilt and 0° inclination of the back
angle
Permissible downward gradient
12% = 7°
Resistance to tilting
12% = 7°
Turn radius
approx. 1100 mm
dependent on the seat shell-underframe
size
Load (max.)
120 kg
incl. seat shell
Empty weight min.
fit for use at:
WW 300 mm, wheels
12", swivel casters 4"
polyurethane
15.1 kg
Frame, seat plate, drum brakes, handrims,
swivel casters, leg supports, push bail, tilt
mechanism
Individual weight
Driving wheels
1.2 - 2.2 kg
Tyres
Conventional pneumatic tyres (1" or 1 3/8" for 12"/ 16" wheels) or puncture proof
tyres
(same dimensions), see tyre casing for tyre pressure - usually 3-10 bar
Corrosion protection
Material
Stainless steel, aluminium
Coating
Powder coating, galvanising
Usage life
3 years
in case of non-excessive strain
Service life
5 years
Normative requirements
The seat shell-underframe complies with the requirements of ISO 7176-8 and the re-
quirements against ignition.
