Instructions for use Loop
SORG
15 of 44
2019-08-16
(2)
After insertion, the locking ball
(A)
must be visibly protruding. Pull at least 1x after
each insertion to test whether the quick-release axle is engaged. It should no longer be possi-
ble to pull the wheels outwards.
3.1 Handling driving wheel
(1)
(2)
(2)
(A)
1.
1.
(1)
(1)
Frictional heat is generated by braking the wheels on the handrims.
Handrim covers can stretch when exposed to heat and become detached from the handrim.
3.1.2 Tyre inflation pressure
You can find the right operating pressure on
the tyre casing - usually 3-10 bar.
(1)
If the tyre is flat, please contact
your specialist dealer.
3.1.3 Quick-release axles
Remove:
Insert:
3.1.1 General information regarding wheels