9 of 28
2019-08-12
Service Record Boogie Fix and Swing
3.2 Assembly Group leg support
3.2.1 Height adjustment
For all adjustment work on the footplates, the user ist not allowed to stand in the standing
aid.
In the frame version "Swing" the footplate can
be adjusted in height:
(1)
Position the footplate(s) for easier entry
and exit from the standing aid as close as pos-
sible to the floor.
(2)
For smaller body sizes it may be necessary
to insert the footplate(s) higher in the center
column.
(3)
To adjust the height of the footplate holder
(A)
:
• Loosen the grub screw
(B)
• and remove the screw
(C)
.
• Place the footplate holder
(A)
in the
center column
(D)
along the holes
(E)
.
• Insert the screw
(C)
again and turn it
tight.
• Tighten the set screw
(B)
again.
(1)
(2)
(3)
(B)
(A)
(C)
(D)
(E)
3.2.2 Position the diveded foot plates
(4)
To adjust the position:
• Loosen the screws
(A)
,
• move the foot plates
(C)
to the desired
position
• and tighten all screws
(A)
again.
(4)
(A)
(A)
(A)
(C)
(C)
