SOREX FLEX Fingerprint, User Manual

Page: 15 / 20

English
12
5. Step – Remove the knob on the inside
Now you can adjust the cylinder length on the other side (the inside) as well upon need.
Loosen the screw with the screwdriver and remove the knob completely. This is necessary
for the installation at the door.
6. Step – Installation at the door
Before you can start with the installation you need to remove the old cylinder. To do so
remove the screw inside the red circle (as shown in the first picture below). After doing so
you’re able to pull out the old cylinder (as seen in the pictures beneath).
Now you can push the FLEX fingerprint cylinder through the lock, from the outside to the
inside. Pay attention that the fingerprint handle is on the outside of the door. When the
cylinder is attached to the door you need to screw down the cylinder as shown in the 2
pictures below.