About the Controller
The Biomass Controller SBMC facilitates efficient use and function control of your System possible while its handling is intuitive.
After every input step the suitable functions are matched to the keys and explained in a text above. In the menu 'measurement val-
ues and settings' are help text and graphics in addition to key words.
The SBMC can be used for the various system variants.
Important characteristics of the SBMC are:
l
Depiction of graphics and texts using a lit display.
l
Simple viewing of the current measurement values.
l
Statistics and system monitoring by means of statistical graphics
l
Extensive setting menus with explanations.
l
Menu block can be activated to prevent unintentional setting changes.
l
Resetting to previously selected values or factory settings.
Scope of supply
l
Biomass Controller
l
2 screws 3,5 x 35 mm and 2 plugs 6 mm for wall installation.
l
4 strain relief clips with 8 screws, replacement fuse 2TA
l
1 connection clamp for PE terminal block
l
SBMC Installation and operating instructions
Optionally contained depending on design/order:
l
Pt1000 temperature sensors, immersion sleeves, overvoltage protection
Hydraulic Variants
The following illustrations should be regarded only as schematic representations of the respective hydraulic systems
and do not claim to be complete. Under no circumstances should the controller replace any safety devices. Depend-
ing on the specific application, additional system and safety components such as check valves, non-return valves,
safety temperature limiters, scalding protectors, etc., may be required.
Storage and solid fuel boiler
6
