6a)Attach the Enclosure
netting (B) over the top of
the trampoline,making
sure the 3 arch netting
pockets go over each of
the arches
6b) Once the pockets are in place,
pull the Enclosure Netting all the
way down until it reaches the
Frame/Top Rails (F).
Secure the arch netting pockets
6c) Make a loop then tie the elastic
straps on the bottom corners of
the Enclosure Netting to comers of
the Frame/Top Rails (F).
Then tie down the rest of the
straps to the Frame.
with the Velcro attached.
TESTING THE TRAMPOLINE
After assembling the trampoline, it is important that you perform the following
safety checks:
•
Using a screw driver, check if all the screws are tightly secured.
•
Move the trampoline around and check the sturdiness of the frame.
•
Using your two hands, put your body weight on one section of the trampoline and
release to check that the floor is even.
•
Inspect the cover pads and check if they completely cover the springs and frame.
•
Make sure the strings of the pads are tied securely.
ENCLOSURE NET SAFETY CHECKS:
•
Hold onto pole net jacket and check that all the enclosure poles are sturdy by
shaking it.
•
Check the enclosure net and pole jackets for any tearing in the stitching
or material.
•
Check the enclosure net zipper and entrance hooks functions properly.
•
Check to see if all safety enclosure hooks are attached to the triangle ring under-
neath the trampoline.
Once all the checks are performed and the trampoline has passed all the initial tests
(above), have one person test the trampoline by jumping on the center continuously
for 5 minutes. If the trampoline feels sturdy then your trampoline passes the test.
Congratulations, you have completed the trampoline safety test. Remember to abide
by all the safety rules. Have fun, and play safe!
PLEASE NOTE:
AS ALREADY MENTIONED IN THE INSTRUCTION MANUAL, CERTAIN WEAR AND
TEAR PARTS HAVE TO BE REPURCHASED FROM YOUR SUPPLIER.
STEP 6