Registration
Interference
If the Baby Unit has lost its link with the Parent Unit
Noise interference on your Parent Unit
– If the Baby Unit is too far away it may be going out of range,
– Your Baby and Parent Units may be too close. Move them further
– lf the Baby Unit is too far away, it may be out of range. Move the
Baby Unit closer to the Parent Unit.
apart. Make sure there is at least 1 to 2m between the 2 Units to
avoid audio feedback.
so move the Baby Unit closer to the Parent Unit.
– Reset both the Parent Unit and Baby Unit by disconnecting
Parent Unit to synchronize.
them from the electrical power. Wait about 15 seconds before
reconnecting. Allow up to one minute for the Baby Unit and the
21
