Sony ZV-1F, Help Manual

Page: 81 / 298

Help Guide
Digital Camera
ZV-1F
Shoot Mode (still image): Manual Exposure
You can shoot with the desired exposure setting by adjusting both the shutter speed and aperture.
Hint
You can change the shutter speed and aperture (F-value) combination without changing the set exposure value (Manual shift).
Assign [AEL hold] or [AEL toggle] to a desired key using the custom key settings, and then turn the control wheel while pressing
that key.
Note
When the amount of ambient light exceeds the metering range of the Metered Manual, the Metered Manual indicator flashes.
The brightness of the image on the screen may differ from the actual image being shot.
Related Topic
ISO (still image/movie)
5-041-856-11(1) Copyright 2022 Sony Corporation
Press the Still/Movie/S&Q button to select the still image shooting mode.
1
MENU → (Shooting) → [Shooting Mode] → [ Shoot Mode] → [Manual Exposure].
2
Press the down side of the control wheel to select the shutter speed or aperture value, then turn the control
wheel to select a value.
You can also set [ ISO] to [ISO AUTO] in manual exposure mode. The ISO value automatically changes to
achieve the appropriate exposure using the aperture value and shutter speed you have set.
When [
ISO] is set to [ISO AUTO], the ISO value indicator will blink if the value you have set is not suitable
for appropriate exposure. If this happens, change the shutter speed or aperture value.
When [
ISO] is set to other than [ISO AUTO], use MM (Metered Manual)* to check the exposure value.
: Images become brighter.
Toward -: Images become darker.
0: Appropriate exposure analyzed by the camera.
3
Indicates under/over for appropriate exposure.
*
Adjust the focus and shoot the subject.
4
81