Sony ZS-M30 Service Manual Download

Page: 55 / 84

ZS-M30

Note on Schematic Diagram: MAIN SECTION (1/3)

• All capacitors are in mF unless otherwise noted. pF: mmF 50 WV

or less are not indicated except for electrolytics and tantalums.

• All resistors are in

Ω

and

W or less unless otherwise specified.

•

: B+ Line.

• Voltages and waveforms are dc with respect to ground under no-

signal (detuned) conditions.
no mark: FM

• Voltages are taken with a VOM (Input impedance 10 M

Ω

Voltage variations may be noted due to normal production toler-
ances.

• Waveforms are taken with a oscilloscope.

Voltage variations may be noted due to normal production toler-
ances.

• Circled numbers refer to waveforms.

Note on Schematic Diagram: MAIN SECTION (2/3)

• All capacitors are in mF unless otherwise noted. pF: mmF 50 WV

or less are not indicated except for electrolytics and tantalums.

• All resistors are in

Ω

and

W or less unless otherwise specified.

Note:

The components identified by mark ! or dotted line with
mark ! are critical for safety.

Replace only with part number specified.

•

: B+ Line.

• Voltages and waveforms are dc with respect to ground under no-

signal (detuned) conditions.
no mark: FM

• Voltages are taken with a VOM (Input impedance 10 M

Ω

Voltage variations may be noted due to normal production toler-
ances.

Note on Schematic Diagram: MAIN SECTION (3/3)

• All capacitors are in mF unless otherwise noted. pF: mmF 50 WV

or less are not indicated except for electrolytics and tantalums.

• All resistors are in W and

Ω

or less unless otherwise specified.

•

: B+ Line.

• Voltages and waveforms are dc with respect to ground under no-

signal (detuned) conditions.
no mark : FM

• Voltages are taken with a VOM (Input impedance 10 M

Ω

Voltage variations may be noted due to normal production toler-
ances.

• Signal path.

: FM

Note on Schematic Diagram: TUNER SECTION

• All capacitors are in mF unless otherwise noted. pF: mmF 50 WV

or less are not indicated except for electrolytics and tantalums.

• All resistors are in

Ω

and

Ω

or less unless otherwise specified.

•

: internal component.

•

: B+ Line.

•

: adjustment for repair.

• Voltages and waveforms are dc with respect to ground under no-

signal (detuned) conditions.
no mark: FM
(

) : MW

> : LW

• Voltages are taken with a VOM (Input impedance 10 M

Ω

Voltage variations may be noted due to normal production toler-
ances.

• Waveforms are taken with a oscilloscope.

Voltage variations may be noted due to normal production toler-
ances.

• Circled numbers refer to waveforms.
• Signal path.

: FM

: AM

Note on Schematic Diagram: CONTROLSECTION

• All capacitors are in mF unless otherwise noted. pF: mmF 50 WV

or less are not indicated except for electrolytics and tantalums.

• All resistors are in

Ω

and

W or9Uss unless otherwise specified.

•

: B+ Line.

• Voltages and waveforms are dc with respect to ground under no-

signal (detuned) conditions.
no mark: FM

• Voltages are taken with a VOM (Input impedance 10 M

Ω

Voltage variations may be noted due to normal production toler-
ances.

Note on Schematic Diagram: CD SECTION

• All capacitors are in mF unless otherwise noted. pF: mmF 50 WV

or less are not indicated except for electrolytics and tantalums.

• All resistors are in

Ω

and

W or less unless otherwise specified.

Note:

The components identified by mark ! or dotted line with
mark ! are critical for safety.

Replace only with part number specified.

•

: B+ Line.

• Voltages and waveforms are dc with respect to ground under no-

signal conditions.
no mark: CD PLAY

• Voltages are taken with a VOM (Input impedance 10 M

Ω

Voltage variations may be noted due to normal production toler-
ances.

• Waveforms are taken with a oscilloscope.

Voltage variations may be noted due to normal production toler-
ances.

• Circled numbers refer to waveforms.
• Signal path.

: CD

: MD REC

Note on Schematic Diagram: MD SECTION (1/2) (2/2)

• All capacitors are in

F unless otherwise noted. pF:

µµ

F 50 WV or

less are not indicated except for electrolytics and tantalums.

• All resistors are in

Ω

and

W or less unless otherwise specified.

Note:

The components identified by mark

or dotted line with

mark

are critical for safety.

Replace only with part number specified.

•

: B+ Line.

• Voltages and waveforms are dc with respect to ground under no-

signal conditions.
no mark : STOP
(

) : PLAY

> : REC

∗

: Impossible to measure

• Voltages are taken with a VOM (Input impedance 10 M

Ω

Voltage variations may be noted due to normal production toler-
ances.

• Waveforms are taken with a oscilloscope.

Voltage variations may be noted due to normal production toler-
ances.

• Circled numbers refer to waveforms.
• Signal path.

: MD PLAY

: MD REC

Summary of Contents for ZS-M30





















































































Search results

Summary of Contents for ZS-M30

Reviews:

Related manuals for ZS-M30

Brands by name

Popular brands

Sony ZS-M30, Service Manual

Search results

Summary of Contents for ZS-M30

Reviews:

Related manuals for ZS-M30

Brands by name

Popular brands