background image

7

EN

Cassette Player/Radio

Memorising only the
desired stations

You can store up to 10 stations on each band
(20 for FM 1 and FM 2, 10 for AM) in the order
of your choice.

1

Press 

(SOURCE)

 repeatedly to select the

tuner.

2

Press 

(MODE)

 repeatedly to select the

desired band.

3

Press either side of 

(SEEK/AMS)

 to tune

in the station you want to store on the
number button.

4

Keep the desired number button (

(1)

 to

(10)

) pressed until “MEM” appears in the

display.

The number button indication appears in the
display.

Note

If you try to store another station on the same number
button, the previously stored station will be erased.

Radio

Memorising stations
automatically

— Best Tuning Memory (BTM)

The unit selects the stations with the strongest
signals and memorizes them. You can store up
to 10 stations on each band (FM 1, FM 2 and
AM).

Caution

When tuning in stations while driving, use
Best Tuning Memory to prevent accidents.

1

Press 

(SOURCE)

 repeatedly to select the

tuner.

Each time you press 

(SOURCE)

, the source

changes as follows:

Tape 

˜

 Tuner

2

Press 

(MODE)

 repeatedly to select the

desired band.

Each time you press 

(MODE)

, the band

changes as follows:

z

 FM 1  

 z

 FM 2  

 z

 AM

3

Press 

(SHIFT)

, then press 

(3)

  (PLAY

MODE) repeatedly until “B.T.M” appears.

4

Press 

(4)

 (

n

) until “B.T.M” flashes.

The unit stores stations in the order of their
frequencies on the number buttons.
A beep sounds and the setting is stored.

5

Press 

(SHIFT)

.

Notes

• The unit does not store stations with weak signals. If

only a few stations are received, some number buttons
remain empty.

• When a preset number is indicated in the display, the

unit starts storing stations from the one currently
displayed.

Summary of Contents for XR-C750





























Reviews: