Sony XR-C750, Operating Instructions Manual

Page: 6 / 28

6
EN
Locating the beginning of a track
— Automatic Music Sensor (AMS)
You can skip up to nine tracks at one time.
During playback, press either side of
(SEEK/AMS)
momentarily.
Note
The AMS function may not work when:
• the blanks between tracks are shorter than four seconds.
• there is noise between tracks.
• there are long sections of low volume or quiet sections.
Changing the displayed item
Each time you press
(DSPL)
, the item changes
as follows:
z
Tape playback
z
Clock
z
Frequency
*
*
While the ATA function is activated.
Playing tracks repeatedly
— Repeat play
You can repeat play the current track.
1
During playback press
(SHIFT)
.
Each time you press
(SHIFT)
, only the items
you can select light up.
2
Press (6) (REP).
Repeat play starts.
To go back to the normal playback mode, press
(6) again.
3
Press
(SHIFT)
.
Playing a tape in various
modes
You can play the tape in various modes:
•Intro (Intro Scan) lets you play the first 10
seconds of all the tracks.
•NR (Dolby NR) lets you select the Dolby
*
NR
B or C system.
•ATA (Automatic Tuner Activation) turns on
the tuner automatically while fast-winding
the tape.
•B.Skip (Blank Skip) skips blanks longer than
eight seconds.
∗
Dolby noise reduction manufactured under license
from Dolby Laboratories Licensing Corporation.
“DOLBY” and the double-D symbol
a are
trademarks of Dolby Laboratories Licensing
Corporation.
1
Press (SHIFT) , then press (3) (PLAY
MODE) repeatedly until the desired play
mode appears.
Each time you press (3) , the item changes
as follows:
Intro n NR n ATA n B.Skip
2
Press
(4)
(
n
) to select the desired play
mode setting (for example: on, NR B).
Playback starts.
3
Press
(SHIFT)
.
To go back to the normal playback mode,
select “off” in step 2 above.
SEEK/AMS
To locate
succeeding tracks
To locate preceding
tracks
1 2 3 4 5 6
SHIFT
PLAY MODE REP
F W D
Intro off
PLAY MODE
SUR EQ
F W D
Intro on
PLAY MODE
SUR EQ