10
EN
Receiving emergency
announcements
If an emergency announcement comes in while
you are listening to the radio, the programme
will be automatically switched to the
announcement. If you are listening to a source
other than the radio, the emergency
announcements will be heard if you set AF or
TA to on. The unit will then automatically
switch to these announcements no matter what
you are listening to at the time.
Presetting the RDS
stations with the AF and
TA data
When you preset the RDS stations, the unit
stores each station’s data as well as its
frequency, so you don’t have to turn on the AF
or TA function every time you tune in the
preset station. You can select a different setting
(AF, TA, or both) for each preset station, or the
same setting for all preset stations.
Presetting the same setting for all
preset stations
1
Select an FM band.
2
Press
(AF/TA)
repeatedly to select either
“AF on,” “TA on” or “AF TA on” (for both
AF and TA functions).
Note that selecting “AF TA off” stores not
only RDS stations, but also non-RDS
stations.
3
Press
(SHIFT)
, then press
(3)
(PLAY
MODE) repeatedly until “B.T.M” appears.
4
Press
(4)
(
n
) until “B.T.M” flashes.
5
Press
(SHIFT)
.
Presetting different settings for
each preset station
1
Select an FM band, and tune in the
desired station.
2
Press
(AF/TA)
repeatedly to select either
“AF on,” “TA on” or “AF TA on” (for both
AF and TA functions).
Listening to traffic
announcements
The Traffic Announcement (TA) and Traffic
Programme (TP) data let you automatically
tune in an FM station that is broadcasting
traffic announcements even though you are
listening to other programme sources.
Press
(AF/TA)
repeatedly until “TA on” or
“AF TA on” appears.
The unit starts searching for traffic
information stations. “TP” appears in the
display when the unit finds a station
broadcasting traffic announcements.
When the traffic announcement starts,
“TA” flashes. The flashing stops when the
traffic announcement is over.
Tip
If the traffic announcement starts while you are listening
to another programme source, the unit automatically
switches to the announcement and goes back to the original
source when the announcement is over.
Notes
• “NO TP” flashes for five seconds if the received station
does not broadcast traffic announcements. Then, the unit
starts searching for a station that broadcasts traffic
announcements.
• When “EON” appears with “TP” in the display, the
current station makes use of traffic announcements
broadcast by other stations in the same network.
To cancel the current traffic
announcement
Press
(AF/TA)
momentarily.
To cancel all traffic announcements, turn off
the function by pressing
(AF/TA)
until
“AF TA off” appears.
Presetting the volume of traffic
announcements
You can preset the volume level of the traffic
announcements beforehand so you won’t miss
the announcement. When a traffic
announcement starts, the volume will be
automatically adjusted to the preset level.
1
Select the desired volume level.
2
Press
(AF/TA)
for two seconds.
“TA” appears and the setting is stored.
Summary of Contents for XR-C7200R
Page 113: ...33 GR ...
