Test Instructions (mech)
1261-4720 Rev 2
Sony Mobile Communications AB
– Company Internal
11(25)
Tests: Service Tests
2.2.13
Flash LED
Check the Flash LED at the back side of phone to see
whether it’s turned on.
Press the Back key to return to the Service Test Menu.
XPERIA
2.2.14
Bluetooth
During this test, the distance between the phone and
the target Bluetooth device must be 1.5 to 5 meters!
Make sure the target Bluetooth device is enabled and
visible always!
The Bluetooth test will be done in following sequences:
Step 1: Enable Bluetooth; wait 4-5 seconds, shows OK;
There is a permission
request, select ‘Yes’.
Step 2: Searching;
Step 3: Show the Device Found list;
SONY
An application on your phone is requesting
permission to turn on Bluetooth and to
make your phone discoverable by other
devices for 300 seconds. Do you want to do
this?
Yes
No
Bluetooth permission request
i
Bluetooth
Enable Bluetooth OK
Searching
Device found
at&t
Step 4: Select the Target Bluetooth Device, and type the
PIN code to pair;
Step 5: Type the Pairing PIN code on the Target Bluetooth
Device also, when suc
cessful, it shows “Test
Complete
”.
Press the Back key to return to the Service Test Menu.
Distance
:
1. 5 to 5 meters
Sony
Ericsson
SONY
Bluetooth
Enable Bluetooth OK
Searching
Devices found
Test Complete
Sony
Ericsson
SONY
Bluetooth
Enable Bluetooth OK
Searching
Devices found
Test Complete
at&t
at&t
