Sony XES-Z50 Operating Instructions Manual Download

Page: 9 / 72

Overview

Using the Rotary Remote

You can use the rotary remote for all operations
except menu operations.

Basic Operations

SOURCE button

Press the button.

The system turns on. Each time you press the button, the
programme source switches as follows: CD

MD (only

when an MD unit is connected)

AUX (only when

Source settings have been done: see page 53)

CD. When an external component is

selected, it will be indicated as an auxiliary (AUX)
component.

To turn off the system, press the OFF button on the side of
the rotary remote (see page 8).

VOL/DISC/PRESET control

Rotate the control.

You can adjust the volume.

Push in and rotate the control.

You can change the disc inside of the changer when CD or
MD is selected.

You can change the preset station in the tuner when FM,
MW, or LW is selected.

Push in and release the control.

The display section shows the list of discs or preset
stations for a few seconds, then reverts to the previous
display.

Summary of Contents for XES-Z50









































































Search results

Summary of Contents for XES-Z50

Reviews:

Related manuals for XES-Z50

Brands by name

Popular brands

Sony XES-Z50, Operating Instructions Manual

Search results

Summary of Contents for XES-Z50

Reviews:

Related manuals for XES-Z50

Brands by name

Popular brands