Sony XES-Z50 Page 67 Operating Instructions Manual Download

Page: 67 / 72

Appendix

Error Messages on the CD/MD Discs

When a malfunction occurs in a CD or MD changer, an alarm is sounded and one of
the following error messages flashes for about five seconds.

Message

Cause

Remedy

Blank*

The MD is blank.

Replace with a recorded MD.

Error*

The CD is inserted upside down.

Insert the CD correctly.

High Temp

The surrounding temperature has
risen to 50°C and playback becomes
impossible.

Wait until the temperature falls.

NO Disc

There is no disc in the magazine.

Insert a disc or discs into the
magazine.

NG Discs

None of the discs in the magazine can
be played.

Replace the discs with others.

No Magazine

There is no magazine in the changer.

Insert discs into the magazine and
load the magazine.

Not Ready

The door of the MD changer is not
locked.

Lock the changer door.

Push Reset

The changer does not operate
for some reason.

Push the reset button on the control
panel or on the rotary commander
holder.

The CD is dirty.

The MD does not play for some
reason.

Clean the CD.

Replace the MD.

There is no CD or MD.

Insert CDs or MDs.

Summary of Contents for XES-Z50









































































Search results

Summary of Contents for XES-Z50

Reviews:

Related manuals for XES-Z50

Brands by name

Popular brands

Sony XES-Z50, Operating Instructions Manual

Search results

Summary of Contents for XES-Z50

Reviews:

Related manuals for XES-Z50

Brands by name

Popular brands