102
Setup Menu
Chapt
er
7
Men
u
s
618
UPCONV EMBEDDED VITC
a)
Select the source of the VITC embedded into output HD-SDI signal when
up converting during playback of an SD clip.
VITC:
Select the VITC of the SD clip.
LTC:
Select the LTC of the SD clip.
619
VITC
a)
Select whether to record the VITC generated by the internal timecode
generator during IMX recording.
off:
Do not record the internally generated VITC.
on:
Record the internally generated VITC.
Note
Even if this item is set to “off”, VITC is recorded if the input video signal
contains VITC and the VITC line is set to “throu” in menu item 723.
638
TIME CODE FOR VDCP CONTROL Make a setting for timecode generated when the REC INIT command or
CUE WITH DATA command is executed from a VDCP-compliant
controller.
REC:VDCP PB:TC [VDCP]:
Recording timecode is continuous timecode
starting from 00:00:00:00 generated in accordance with the VDCP
controller. Timecode for cueing is the same as clip timecode.
REC:TCG PB:TC [menu]:
Timecode for recording depends on the
settings of the menu items related to the timecode generator.
Timecode for cueing is the same as clip timecode.
REC:VDCP PB:Zero Base [VDCP/0]:
Recording timecode is continuous
timecode starting from 00:00:00:00 generated in accordance with the
VDCP controller. Timecode for cueing is generated taking
00:00:00:00 as the timecode value of the clip’s first frame.
REC:TCG PB:Zero Base [menu/0]:
Timecode for recording depends on
the settings of the menu items related to the timecode generator.
Timecode for cueing is generated taking 00:00:00:00 as the
timecode value of the clip’s first frame.
651
UMID SDI OUTPUT
Select whether to output UMID in the VANC of the SDI output.
off
: Do not output.
on
: Output.
See “Using UMID Data” (page 134) for more information about UMID.
652
UMID SD VANC LINE
a)
Select the line in which UMID is output when menu item 651 is set to
“on”.
12H, 13H, 15H, 16H, 17H, 18H, 19H (59.94i/59.94P/29.97P mode)
9H, 10H, 12H, 13H, 14H, 15H, 16H, 17H, 18H (50i/50P/25P mode)
See “Using UMID Data” (page 134) for more information about UMID.
653
UMID HD VANC LINE
Select the line in which UMID is output when menu item 651 is set to
“on”.
9H to 17H to 20H (59.94i, 50i, 29.97P, 25P, 23.98P mode)
9H to 17H to 25H (59.94P, 50P mode)
See “Using UMID Data” (page 134) for more information about UMID.
657
ESSENCE MARK SDI OUTPUT
Select whether to output essence marks in the SDI output VANC.
off:
Do not output.
on:
Output.
660
ESSENCE MARK SD VANC LINE
a)
Select the line to which to output essence marks when menu item 657 is
set to “on”.
12H, 13H, 15H, 16H, 17H, 18H, 19H (59.94i/59.94P/29.97P mode)
9H, 10H, 12H, 13H, 14H, 15H, 16H, 17H, 18H (50i/50P/25P mode)
665
ESSENCE MARK HD VANC LINE
Select the line to which to output essence marks when item 657 is set to
“on”.
9H to 17H to 20H (59.94i, 50i, 29.97P, 25P, 23.98P mode)
9H to 17H to 25H (59.94P, 50P mode)
Menu items in the 600s, relating to the timecode, metadata, and UMID
Item number
Item name
Settings
